EFB-Tagungsband Nr. 28

.

Technologies to Maximise Productivity in Sheet Metal Working

Papers/Tagungsband T28
of the BLECHbusiness '07 Conference
27 to 29 November 2007 in Warsaw

Herausgeber: EFB, Hannover

ISBN: 978-3-86776-302 – 144 Seiten, s/w, 137 Abb., 15,00 EUR


Contents

Conference Session I: Research

New Trends in Research on Sheet Metal Working
Norbert Wellmann, European Research Association of Sheet Metal Working, Hanover

Sheet-Metal Research in Poland – Institutes and Programs
Agata
Walewska, AiF German Federation of Industrial Research Associations, Warsaw office

Conference Session II: Joining

Tightness and Mechanical Strength of Lock Bolt and Link Rivet Joints Depending on Different Materials and Surface Coatings
Martin-Christoph Wanner, Knuth-Michael Henkel, Normen Fuchs, Marcus Delin, Institute of Manufacturing Engineering, University of Rostock

Electron Beam and Laser Beam – Tools for the Joining of Metal Material Combinations
Uwe Reisgen, Simon Olschok, Klaus Woeste, Nikolaus Wagner, ISF - Welding and Joining Institute, RWTH - Aachen University

Adhesive Bonding as Clamping Technology for Laser Beam Welding
Stefan Böhm, Gregor Wisner, Institute of Joining and Welding Technology, Technical University of Braunschweig – Nikolaus Wagner, ISF - Welding and Joining Institute, RWTH - Aachen University

Conference Session III: Forming

Patchwork Blanks – an Effective Technology for the Economic Production of Lightweight Parts
Reimund Neugebauer, Reinhard Mauermann, Tino Kühn, Sandra Menzel, Fraunhofer Institute for Machine Tools and Forming Technology IWU Chemnitz –Jens Standfuß, Axel Jahn, Fraunhofer Institute for Material and Beam Technology IWS Dresden

The Use of Pressing to Produce Sharply Bent Profiles
Klaus Müller, Extrusion Research and Development Center, Technical University of Berlin – Volker Thoms, Institute of Forming and Prototyping Technology, Technical University of Dresden

Process Optimisation of Press Hardening
Bernd-Arno Behrens, Sven Hübner, Cord Schäffner, Philipp Olle, Falko Schäfer, Institute of Metal Forming and Metal-Forming Machines, University of Hanover

Ceramic-Steel-Composite Layers for Sheet Metal Forming
Lars Hauschild, Laser Center Hanover

Conference Session IV: Machines + Tools

Stamping and Forming Machines for New Steel Grades
Karl Stahl, Gräbener Pressensysteme, Netphen-Wertenbach

Experimental Investigation of Influencing Factors on the Dynamic Properties of Forming Presses
Thomas Hofmann, Institute for Production Engineering and Forming Machines, Darmstadt University of Technology

Conference Session V: Methods

Sheet Metal Joints at Crash Condition: From Experimental Parameter Determination to FE-Simulation of Vehicle Constructions at Crash Condition
Ortwin Hahn, Matthias Wißling, LWF Laboratory for Materials and Joining Technology, University of Paderborn

Successful Handling of the Model Diversity with Stamping Simulations
Martin Rambke, Department of Mechanical Engineering, University of Applied Sciences of Braunschweig / Wolfenbüttel

 


.

xxnoxx_zaehler